Understand affordable welding devices, compare used machines and make simple workshop accessories. Spend with a clear idea of the projects you want to do.
CHOOSE YOUR STARTING POINT
Three ways into DIY welding.
Process trade-offs for a first setup. Material, thickness, procedure, installation and operator skill determine suitability.
Equipment
Where to start
Compare before buying
Read more
MMA / stick inverter
Evaluate suitable steel practice and repairs.
Electrode support, supply, useful output, duty cycle and slag cleanup.
Include suitable safety equipment, fume control, supply checks, training, preparation tools, consumables and any gas costs. Confirm installation restrictions: a 230 V plug alone does not prove residential suitability.
Choose a currency and price ceiling. Compare the complete package.
Start with recorded EUR offers up to €500, or switch currency and ceiling below. This view includes home and mixed-use machines. An unknown price is excluded whenever a price ceiling is active. Keep VAT, delivery, included equipment and local service in the comparison.
More filters1
Only recorded EUR prices at or below 500 are shown. Models without a recorded price are excluded.
50 machines of 380
Select up to three machines to compare. Prices are dated offers for the named market and package. Price ceilings use each machine’s recorded reference price. Open shop prices for separate EU, UK and US listings. The catalogue is an editorial selection, not a numbered performance ranking.
Compare VECTOR ARC 160K for portable electrode welding and occasional repairs. Match electrode type and diameter, supply circuit and cable length to the work rather than buying by the advertised maximum alone. At the observed EUR 79.00 price, compare the complete working setup before choosing this model.
Duty cycle
Not recorded; confirm exact model manual
Price basis
Observed official product-page price on 15 October 2026; confirm VAT, freight and included equipment at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Budget for appropriate electrodes, dry storage, PPE and usable work leads. Confirm low-current behaviour and local repair support; verify the rated duty cycle at your intended current. A comparable temperature-rated duty cycle was not recorded.
Compare IPOTOOLS MMA-120S for portable electrode welding and occasional repairs. Match electrode type and diameter, supply circuit and cable length to the work rather than buying by the advertised maximum alone. At the observed EUR 79.99 price, compare the complete working setup before choosing this model.
Duty cycle
✔ MMA duty cycle: 120A–60% / 76A–100% (confirm test conditions in manual)
Price basis
Observed manufacturer-store listed price on 15 October 2026; confirm VAT, delivery and selected package at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Budget for appropriate electrodes, dry storage, PPE and usable work leads. Confirm low-current behaviour and local repair support; verify the rated duty cycle at your intended current. Supply voltage and circuit requirements still need confirmation.
Compare STAHLWERK ARC 160 MD for controlled fabrication and repair work. Match DC or AC capability to the base metal and confirm torch, pedal and starting method for the exact package. At the observed EUR 79.99 price, compare the complete working setup before choosing this model.
Duty cycle
MMA duty cycle (40 °C) (confirm test conditions in manual)
Price basis
Observed official product-page price on 15 October 2026; confirm VAT, freight and included equipment at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Argon, tungsten, filler rod and suitable PPE add to the machine price. Confirm low-current control and pedal compatibility in the manual; a model number is not a continuous-output rating.
Compare VECTOR ARC 160D for controlled fabrication and repair work. Match DC or AC capability to the base metal and confirm torch, pedal and starting method for the exact package. At the observed EUR 89.00 price, compare the complete working setup before choosing this model.
Duty cycle
Not recorded; confirm exact model manual
Price basis
Observed official product-page price on 15 October 2026; confirm VAT, freight and included equipment at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Argon, tungsten, filler rod and suitable PPE add to the machine price. Confirm low-current control and pedal compatibility in the manual; a model number is not a continuous-output rating. Supply voltage and circuit requirements still need confirmation. A comparable temperature-rated duty cycle was not recorded.
Compare VECTOR ARC 200G for portable electrode welding and occasional repairs. Match electrode type and diameter, supply circuit and cable length to the work rather than buying by the advertised maximum alone. At the observed EUR 95.00 price, compare the complete working setup before choosing this model.
Duty cycle
duty cycle (ED) MMA/STICK 40°C: 200 A at 28V 20%
Price basis
Observed official product-page price on 15 October 2026; confirm VAT, freight and included equipment at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Budget for appropriate electrodes, dry storage, PPE and usable work leads. Confirm low-current behaviour and local repair support; verify the rated duty cycle at your intended current.
Compare IPOTOOLS MMA-160R for portable electrode welding and occasional repairs. Match electrode type and diameter, supply circuit and cable length to the work rather than buying by the advertised maximum alone. At the observed EUR 99.99 price, compare the complete working setup before choosing this model.
Duty cycle
✔ MMA duty cycle: 160A–60% / 120A–100% (confirm test conditions in manual)
Price basis
Observed manufacturer-store listed price on 15 October 2026; confirm VAT, delivery and selected package at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Budget for appropriate electrodes, dry storage, PPE and usable work leads. Confirm low-current behaviour and local repair support; verify the rated duty cycle at your intended current. Supply voltage and circuit requirements still need confirmation.
Compare VECTOR ARC 200K for portable electrode welding and occasional repairs. Match electrode type and diameter, supply circuit and cable length to the work rather than buying by the advertised maximum alone. At the observed EUR 109.00 price, compare the complete working setup before choosing this model.
Duty cycle
Duty cycle (ED) MMA/STICK40°C: 200 A at 28V 20%
Price basis
Observed official product-page price on 15 October 2026; confirm VAT, freight and included equipment at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Budget for appropriate electrodes, dry storage, PPE and usable work leads. Confirm low-current behaviour and local repair support; verify the rated duty cycle at your intended current.
Compare VECTOR ARC 200 for portable electrode welding and occasional repairs. Match electrode type and diameter, supply circuit and cable length to the work rather than buying by the advertised maximum alone. At the observed EUR 119.00 price, compare the complete working setup before choosing this model.
Duty cycle
Not recorded; confirm exact model manual
Price basis
Observed official product-page price on 15 October 2026; confirm VAT, freight and included equipment at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Budget for appropriate electrodes, dry storage, PPE and usable work leads. Confirm low-current behaviour and local repair support; verify the rated duty cycle at your intended current. Supply voltage and circuit requirements still need confirmation. A comparable temperature-rated duty cycle was not recorded.
Compare IPOTOOLS MMA-200R for portable electrode welding and occasional repairs. Match electrode type and diameter, supply circuit and cable length to the work rather than buying by the advertised maximum alone. At the observed EUR 119.99 price, compare the complete working setup before choosing this model.
Duty cycle
✔ MMA duty cycle: 200A–60% / 130A–100% (confirm test conditions in manual)
Price basis
Observed manufacturer-store listed price on 15 October 2026; confirm VAT, delivery and selected package at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Budget for appropriate electrodes, dry storage, PPE and usable work leads. Confirm low-current behaviour and local repair support; verify the rated duty cycle at your intended current. Supply voltage and circuit requirements still need confirmation.
Compare STAHLWERK ARC 200 MD for controlled fabrication and repair work. Match DC or AC capability to the base metal and confirm torch, pedal and starting method for the exact package. At the observed EUR 119.99 price, compare the complete working setup before choosing this model.
Duty cycle
MMA duty cycle (40 °C) (confirm test conditions in manual)
Price basis
Observed official product-page price on 15 October 2026; confirm VAT, freight and included equipment at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Argon, tungsten, filler rod and suitable PPE add to the machine price. Confirm low-current control and pedal compatibility in the manual; a model number is not a continuous-output rating.
Compare STAHLWERK Mini FLUX 120 ST Digital for controlled fabrication and repair work. Match DC or AC capability to the base metal and confirm torch, pedal and starting method for the exact package. At the observed EUR 119.99 price, compare the complete working setup before choosing this model.
Duty cycle
FLUX duty cycle (40°C):: 15 % at 120 A / 60 % at 60 A / 100 % at 46 A (FLUX)
Price basis
Observed official product-page price on 15 October 2026; confirm VAT, freight and included equipment at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Argon, tungsten, filler rod and suitable PPE add to the machine price. Confirm low-current control and pedal compatibility in the manual; a model number is not a continuous-output rating.
Compare IPOTOOLS FLUX-135 Flux Welding Machine for portable electrode welding and occasional repairs. Match electrode type and diameter, supply circuit and cable length to the work rather than buying by the advertised maximum alone. At the observed EUR 129.99 price, compare the complete working setup before choosing this model.
Duty cycle
✔ FLUX duty cycle: 160A–60% / 125A–100% (confirm test conditions in manual)
Price basis
Observed manufacturer-store listed price on 15 October 2026; confirm VAT, delivery and selected package at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Budget for appropriate electrodes, dry storage, PPE and usable work leads. Confirm low-current behaviour and local repair support; verify the rated duty cycle at your intended current. Supply voltage and circuit requirements still need confirmation.
Compare VECTOR MIG 160 for steel repairs and short workshop projects. Check minimum output, wire sizes and spool capacity against the material you actually use before paying for extra modes. At the observed EUR 149.00 price, compare the complete working setup before choosing this model.
Duty cycle
Not recorded; confirm exact model manual
Price basis
Observed official product-page price on 15 October 2026; confirm VAT, freight and included equipment at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Gas-shielded MIG adds cylinder rental or purchase, regulator and wire costs. Confirm torch connector, spare tips and drive rolls locally; a low machine price does not establish long-term running cost. Supply voltage and circuit requirements still need confirmation. A comparable temperature-rated duty cycle was not recorded.
Compare STAHLWERK ARC 200 Synergic Pro for controlled fabrication and repair work. Match DC or AC capability to the base metal and confirm torch, pedal and starting method for the exact package. At the observed EUR 159.99 price, compare the complete working setup before choosing this model.
Duty cycle
Duty cycle (40°C):: 10% at 200 A | 100% at 63 A
Price basis
Observed official product-page price on 15 October 2026; confirm VAT, freight and included equipment at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Argon, tungsten, filler rod and suitable PPE add to the machine price. Confirm low-current control and pedal compatibility in the manual; a model number is not a continuous-output rating.
Compare IPOTOOLS MIG 160ER for steel repairs and short workshop projects. Check minimum output, wire sizes and spool capacity against the material you actually use before paying for extra modes. At the observed EUR 179.99 price, compare the complete working setup before choosing this model.
Duty cycle
✔ MIG duty cycle: 160A–60% / 125A–100% (confirm test conditions in manual)
Price basis
Observed manufacturer-store listed price on 15 October 2026; confirm VAT, delivery and selected package at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Gas-shielded MIG adds cylinder rental or purchase, regulator and wire costs. Confirm torch connector, spare tips and drive rolls locally; a low machine price does not establish long-term running cost. Supply voltage and circuit requirements still need confirmation.
Compare STAHLWERK FLUX 160 ST Digital for controlled fabrication and repair work. Match DC or AC capability to the base metal and confirm torch, pedal and starting method for the exact package. At the observed EUR 179.99 price, compare the complete working setup before choosing this model.
Duty cycle
Duty cycle FLUX (40 °C): 15 % at 160 A / 60 % at 80 A / 100 % at 62 A
Price basis
Observed official product-page price on 15 October 2026; confirm VAT, freight and included equipment at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Argon, tungsten, filler rod and suitable PPE add to the machine price. Confirm low-current control and pedal compatibility in the manual; a model number is not a continuous-output rating.
Compare VECTOR ARC M for portable electrode welding and occasional repairs. Match electrode type and diameter, supply circuit and cable length to the work rather than buying by the advertised maximum alone. At the observed EUR 199.00 price, compare the complete working setup before choosing this model.
Duty cycle
Not recorded; confirm exact model manual
Price basis
Observed official product-page price on 15 October 2026; confirm VAT, freight and included equipment at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Budget for appropriate electrodes, dry storage, PPE and usable work leads. Confirm low-current behaviour and local repair support; verify the rated duty cycle at your intended current. A comparable temperature-rated duty cycle was not recorded.
Compare VECTOR MIG 200 for steel repairs and short workshop projects. Check minimum output, wire sizes and spool capacity against the material you actually use before paying for extra modes. At the observed EUR 199.00 price, compare the complete working setup before choosing this model.
Duty cycle
Not recorded; confirm exact model manual
Price basis
Observed official product-page price on 15 October 2026; confirm VAT, freight and included equipment at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Gas-shielded MIG adds cylinder rental or purchase, regulator and wire costs. Confirm torch connector, spare tips and drive rolls locally; a low machine price does not establish long-term running cost. Supply voltage and circuit requirements still need confirmation. A comparable temperature-rated duty cycle was not recorded.
Compare STAHLWERK ARC 200 Puls Pro for controlled fabrication and repair work. Match DC or AC capability to the base metal and confirm torch, pedal and starting method for the exact package. At the observed EUR 199.99 price, compare the complete working setup before choosing this model.
Duty cycle
Duty cycle (40°C):: 10% at 200 A | 100% at 63 A
Price basis
Observed official product-page price on 15 October 2026; confirm VAT, freight and included equipment at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Argon, tungsten, filler rod and suitable PPE add to the machine price. Confirm low-current control and pedal compatibility in the manual; a model number is not a continuous-output rating.
Compare STAHLWERK MIG/MAG 160 M for controlled fabrication and repair work. Match DC or AC capability to the base metal and confirm torch, pedal and starting method for the exact package. At the observed EUR 199.99 price, compare the complete working setup before choosing this model.
Duty cycle
Duty cycle (40 °C) MIG/MAG | TIG | MMA: 15 % at 160 A / 60 % at 80 A / 100 % at 62 A
Price basis
Observed official product-page price on 15 October 2026; confirm VAT, freight and included equipment at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Argon, tungsten, filler rod and suitable PPE add to the machine price. Confirm low-current control and pedal compatibility in the manual; a model number is not a continuous-output rating.
Compare IPOTOOLS MIG 160ERS for steel repairs and short workshop projects. Check minimum output, wire sizes and spool capacity against the material you actually use before paying for extra modes. At the observed EUR 209.99 price, compare the complete working setup before choosing this model.
Duty cycle
✔ MIG duty cycle: 160A–60% / 125A–100% (confirm test conditions in manual)
Price basis
Observed manufacturer-store listed price on 15 October 2026; confirm VAT, delivery and selected package at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Gas-shielded MIG adds cylinder rental or purchase, regulator and wire costs. Confirm torch connector, spare tips and drive rolls locally; a low machine price does not establish long-term running cost. Supply voltage and circuit requirements still need confirmation.
Compare IPOTOOLS TIG-200R for controlled fabrication and repair work. Match DC or AC capability to the base metal and confirm torch, pedal and starting method for the exact package. At the observed EUR 219.99 price, compare the complete working setup before choosing this model.
Duty cycle
✔ Duty cycle TIG: 200A–60% / 130A–100% (confirm test conditions in manual)
Price basis
Observed manufacturer-store listed price on 15 October 2026; confirm VAT, delivery and selected package at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Argon, tungsten, filler rod and suitable PPE add to the machine price. Confirm low-current control and pedal compatibility in the manual; a model number is not a continuous-output rating. Supply voltage and circuit requirements still need confirmation.
Compare VECTOR MIG165 for steel repairs and short workshop projects. Check minimum output, wire sizes and spool capacity against the material you actually use before paying for extra modes. At the observed EUR 229.00 price, compare the complete working setup before choosing this model.
Duty cycle
duty cycle (ED) MIG / MAG 40 ° C: 165 A at 22 V 60%
Price basis
Observed official product-page price on 15 October 2026; confirm VAT, freight and included equipment at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Gas-shielded MIG adds cylinder rental or purchase, regulator and wire costs. Confirm torch connector, spare tips and drive rolls locally; a low machine price does not establish long-term running cost.
Price snapshots can differ by country, tax treatment, controls and included accessories. Sorting keeps each original currency separate. Read the full package and confirm an up-to-date local offer before buying. Descriptions are editorial assessments of specifications; they are not hands-on test results. Each model page keeps its references at the bottom.
A simple route into steel repairs. Compare usable output on your actual supply, electrode sizes, lead length and service support. A high advertised maximum does not describe continuous output.
For wire-feed practice, confirm whether the machine is gasless-only or also supports gas MIG. Check wire diameter, polarity change, torch connector and replacement feed parts. Include gas equipment when needed.
Check DC or AC/DC before buying: DC-only TIG does not provide AC TIG for aluminium. Compare HF versus contact starting, foot-control support and the price of the torch, regulator and gas.
