Understand affordable welding devices, compare used machines and make simple workshop accessories. Spend with a clear idea of the projects you want to do.
CHOOSE YOUR STARTING POINT
Three ways into DIY welding.
Process trade-offs for a first setup. Material, thickness, procedure, installation and operator skill determine suitability.
Equipment
Where to start
Compare before buying
Read more
MMA / stick inverter
Evaluate suitable steel practice and repairs.
Electrode support, supply, useful output, duty cycle and slag cleanup.
Include suitable safety equipment, fume control, supply checks, training, preparation tools, consumables and any gas costs. Confirm installation restrictions: a 230 V plug alone does not prove residential suitability.
Choose a currency and price ceiling. Compare the complete package.
Start with recorded EUR offers up to €500, or switch currency and ceiling below. This view includes home and mixed-use machines. An unknown price is excluded whenever a price ceiling is active. Keep VAT, delivery, included equipment and local service in the comparison.
More filters
Only recorded EUR prices at or below 500 are shown. Models without a recorded price are excluded.
22 machines of 380
Select up to three machines to compare. Prices are dated offers for the named market and package. Price ceilings use each machine’s recorded reference price. Open shop prices for separate EU, UK and US listings. The catalogue is an editorial selection, not a numbered performance ranking.
Compare IPOTOOLS FLUX-135 Flux Welding Machine for portable electrode welding and occasional repairs. Match electrode type and diameter, supply circuit and cable length to the work rather than buying by the advertised maximum alone. At the observed EUR 129.99 price, compare the complete working setup before choosing this model.
Duty cycle
✔ FLUX duty cycle: 160A–60% / 125A–100% (confirm test conditions in manual)
Price basis
Observed manufacturer-store listed price on 15 October 2026; confirm VAT, delivery and selected package at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Budget for appropriate electrodes, dry storage, PPE and usable work leads. Confirm low-current behaviour and local repair support; verify the rated duty cycle at your intended current. Supply voltage and circuit requirements still need confirmation.
Compare IPOTOOLS MIG 160ER for steel repairs and short workshop projects. Check minimum output, wire sizes and spool capacity against the material you actually use before paying for extra modes. At the observed EUR 179.99 price, compare the complete working setup before choosing this model.
Duty cycle
✔ MIG duty cycle: 160A–60% / 125A–100% (confirm test conditions in manual)
Price basis
Observed manufacturer-store listed price on 15 October 2026; confirm VAT, delivery and selected package at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Gas-shielded MIG adds cylinder rental or purchase, regulator and wire costs. Confirm torch connector, spare tips and drive rolls locally; a low machine price does not establish long-term running cost. Supply voltage and circuit requirements still need confirmation.
Compare IPOTOOLS MIG 160ERS for steel repairs and short workshop projects. Check minimum output, wire sizes and spool capacity against the material you actually use before paying for extra modes. At the observed EUR 209.99 price, compare the complete working setup before choosing this model.
Duty cycle
✔ MIG duty cycle: 160A–60% / 125A–100% (confirm test conditions in manual)
Price basis
Observed manufacturer-store listed price on 15 October 2026; confirm VAT, delivery and selected package at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Gas-shielded MIG adds cylinder rental or purchase, regulator and wire costs. Confirm torch connector, spare tips and drive rolls locally; a low machine price does not establish long-term running cost. Supply voltage and circuit requirements still need confirmation.
Compare IPOTOOLS MIG 185R for steel repairs and short workshop projects. Check minimum output, wire sizes and spool capacity against the material you actually use before paying for extra modes. At the observed EUR 349.99 price, compare the complete working setup before choosing this model.
Duty cycle
✔ MIG duty cycle: 185A–60% / 132A–100% (confirm test conditions in manual)
Price basis
Observed manufacturer-store listed price on 15 October 2026; confirm VAT, delivery and selected package at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Gas-shielded MIG adds cylinder rental or purchase, regulator and wire costs. Confirm torch connector, spare tips and drive rolls locally; a low machine price does not establish long-term running cost. Supply voltage and circuit requirements still need confirmation.
Compare IPOTOOLS MIG 185SYN for steel repairs and short workshop projects. Check minimum output, wire sizes and spool capacity against the material you actually use before paying for extra modes. At the observed EUR 379.99 price, compare the complete working setup before choosing this model.
Duty cycle
✔ MIG duty cycle: 185A–60% / 132A–100%
Price basis
Observed manufacturer-store listed price on 15 October 2026; confirm VAT, delivery and selected package at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Gas-shielded MIG adds cylinder rental or purchase, regulator and wire costs. Confirm torch connector, spare tips and drive rolls locally; a low machine price does not establish long-term running cost. Supply voltage and circuit requirements still need confirmation.
Compare IPOTOOLS MIG 210DP for steel repairs and short workshop projects. Check minimum output, wire sizes and spool capacity against the material you actually use before paying for extra modes. At the observed EUR 499.99 price, compare the complete working setup before choosing this model.
Duty cycle
Not recorded; confirm exact model manual
Price basis
Observed manufacturer-store listed price on 15 October 2026; confirm VAT, delivery and selected package at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Gas-shielded MIG adds cylinder rental or purchase, regulator and wire costs. Confirm torch connector, spare tips and drive rolls locally; a low machine price does not establish long-term running cost. Supply voltage and circuit requirements still need confirmation. A comparable temperature-rated duty cycle was not recorded.
Compare IPOTOOLS MIG 225 SYN for steel repairs and short workshop projects. Check minimum output, wire sizes and spool capacity against the material you actually use before paying for extra modes. At the observed EUR 429.99 price, compare the complete working setup before choosing this model.
Duty cycle
✔ MIG duty cycle: 225A–60% / 175A–100%
Price basis
Observed manufacturer-store listed price on 15 October 2026; confirm VAT, delivery and selected package at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Gas-shielded MIG adds cylinder rental or purchase, regulator and wire costs. Confirm torch connector, spare tips and drive rolls locally; a low machine price does not establish long-term running cost. Supply voltage and circuit requirements still need confirmation.
Compare IPOTOOLS MIG 250 for steel repairs and short workshop projects. Check minimum output, wire sizes and spool capacity against the material you actually use before paying for extra modes. At the observed EUR 399.99 price, compare the complete working setup before choosing this model.
Duty cycle
✔ MIG duty cycle: 250A–35% (confirm test conditions in manual)
Price basis
Observed manufacturer-store listed price on 15 October 2026; confirm VAT, delivery and selected package at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Gas-shielded MIG adds cylinder rental or purchase, regulator and wire costs. Confirm torch connector, spare tips and drive rolls locally; a low machine price does not establish long-term running cost. Supply voltage and circuit requirements still need confirmation.
Compare IPOTOOLS MIG 250S for steel repairs and short workshop projects. Check minimum output, wire sizes and spool capacity against the material you actually use before paying for extra modes. At the observed EUR 449.99 price, compare the complete working setup before choosing this model.
Duty cycle
✔ MIG duty cycle: 250 A – 35 % / 200 A – 60% / 160 A – 100% (confirm test conditions in manual)
Price basis
Observed manufacturer-store listed price on 15 October 2026; confirm VAT, delivery and selected package at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Gas-shielded MIG adds cylinder rental or purchase, regulator and wire costs. Confirm torch connector, spare tips and drive rolls locally; a low machine price does not establish long-term running cost. Supply voltage and circuit requirements still need confirmation.
A low purchase-price candidate for occasional workshop work where the supply and EMC requirements are met. Editorial fit assessment.
Duty cycle
MIG: 200 A at 15%; 100 A at 60%; 77 A at 100% (40°C)
Price basis
German manufacturer listing incl. 19% VAT; shipping extra
Package
3 m MIG torch, earth lead and gas hose listed. Check cylinder, regulator and consumables separately.
Considerations
Out of stock at the source. Limited duty cycle at maximum output. Manufacturer excludes residential public low-voltage environments; check the manual before purchase. No AC TIG.
Compare STAHLWERK FLUX 160 ST Digital for controlled fabrication and repair work. Match DC or AC capability to the base metal and confirm torch, pedal and starting method for the exact package. At the observed EUR 179.99 price, compare the complete working setup before choosing this model.
Duty cycle
Duty cycle FLUX (40 °C): 15 % at 160 A / 60 % at 80 A / 100 % at 62 A
Price basis
Observed official product-page price on 15 October 2026; confirm VAT, freight and included equipment at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Argon, tungsten, filler rod and suitable PPE add to the machine price. Confirm low-current control and pedal compatibility in the manual; a model number is not a continuous-output rating.
Compare STAHLWERK MIG MAG 200 Puls Pro for steel repairs and short workshop projects. Check minimum output, wire sizes and spool capacity against the material you actually use before paying for extra modes. At the observed EUR 449.99 price, compare the complete working setup before choosing this model.
Duty cycle
Not recorded; confirm exact model manual
Price basis
Observed official product-page price on 15 October 2026; confirm VAT, freight and included equipment at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Gas-shielded MIG adds cylinder rental or purchase, regulator and wire costs. Confirm torch connector, spare tips and drive rolls locally; a low machine price does not establish long-term running cost. A comparable temperature-rated duty cycle was not recorded.
Compare STAHLWERK MIG MAG 200 Spot Pulse Pro Digital for steel repairs and short workshop projects. Check minimum output, wire sizes and spool capacity against the material you actually use before paying for extra modes. At the observed EUR 499.99 price, compare the complete working setup before choosing this model.
Duty cycle
Duty cycle (40°C) MIG / Lift-TIG / MMA:: 15% at 200 A / 100% at 77.5 A
Price basis
Observed official product-page price on 15 October 2026; confirm VAT, freight and included equipment at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Gas-shielded MIG adds cylinder rental or purchase, regulator and wire costs. Confirm torch connector, spare tips and drive rolls locally; a low machine price does not establish long-term running cost.
Compare STAHLWERK MIG MAG 200 ST digital for steel repairs and short workshop projects. Check minimum output, wire sizes and spool capacity against the material you actually use before paying for extra modes. At the observed EUR 369.99 price, compare the complete working setup before choosing this model.
Duty cycle
Not recorded; confirm exact model manual
Price basis
Observed official product-page price on 15 October 2026; confirm VAT, freight and included equipment at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Gas-shielded MIG adds cylinder rental or purchase, regulator and wire costs. Confirm torch connector, spare tips and drive rolls locally; a low machine price does not establish long-term running cost. A comparable temperature-rated duty cycle was not recorded.
Compare STAHLWERK MIG/MAG 160 M for controlled fabrication and repair work. Match DC or AC capability to the base metal and confirm torch, pedal and starting method for the exact package. At the observed EUR 199.99 price, compare the complete working setup before choosing this model.
Duty cycle
Duty cycle (40 °C) MIG/MAG | TIG | MMA: 15 % at 160 A / 60 % at 80 A / 100 % at 62 A
Price basis
Observed official product-page price on 15 October 2026; confirm VAT, freight and included equipment at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Argon, tungsten, filler rod and suitable PPE add to the machine price. Confirm low-current control and pedal compatibility in the manual; a model number is not a continuous-output rating.
Compare STAHLWERK Mini FLUX 120 ST Digital for controlled fabrication and repair work. Match DC or AC capability to the base metal and confirm torch, pedal and starting method for the exact package. At the observed EUR 119.99 price, compare the complete working setup before choosing this model.
Duty cycle
FLUX duty cycle (40°C):: 15 % at 120 A / 60 % at 60 A / 100 % at 46 A (FLUX)
Price basis
Observed official product-page price on 15 October 2026; confirm VAT, freight and included equipment at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Argon, tungsten, filler rod and suitable PPE add to the machine price. Confirm low-current control and pedal compatibility in the manual; a model number is not a continuous-output rating.
Compare STAHLWERK MTM-200 ST for steel repairs and short workshop projects. Check minimum output, wire sizes and spool capacity against the material you actually use before paying for extra modes. At the observed EUR 499.99 price, compare the complete working setup before choosing this model.
Duty cycle
Duty cycle TIG / MIG (40°C): 15% at 200 A / 60% at 100 A / 100% at 77.5 A
Price basis
Observed official product-page price on 15 October 2026; confirm VAT, freight and included equipment at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Gas-shielded MIG adds cylinder rental or purchase, regulator and wire costs. Confirm torch connector, spare tips and drive rolls locally; a low machine price does not establish long-term running cost.
Compare VECTOR MIG 160 for steel repairs and short workshop projects. Check minimum output, wire sizes and spool capacity against the material you actually use before paying for extra modes. At the observed EUR 149.00 price, compare the complete working setup before choosing this model.
Duty cycle
Not recorded; confirm exact model manual
Price basis
Observed official product-page price on 15 October 2026; confirm VAT, freight and included equipment at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Gas-shielded MIG adds cylinder rental or purchase, regulator and wire costs. Confirm torch connector, spare tips and drive rolls locally; a low machine price does not establish long-term running cost. Supply voltage and circuit requirements still need confirmation. A comparable temperature-rated duty cycle was not recorded.
Compare VECTOR MIG 200 for steel repairs and short workshop projects. Check minimum output, wire sizes and spool capacity against the material you actually use before paying for extra modes. At the observed EUR 199.00 price, compare the complete working setup before choosing this model.
Duty cycle
Not recorded; confirm exact model manual
Price basis
Observed official product-page price on 15 October 2026; confirm VAT, freight and included equipment at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Gas-shielded MIG adds cylinder rental or purchase, regulator and wire costs. Confirm torch connector, spare tips and drive rolls locally; a low machine price does not establish long-term running cost. Supply voltage and circuit requirements still need confirmation. A comparable temperature-rated duty cycle was not recorded.
Compare VECTOR MIG 255 for steel repairs and short workshop projects. Check minimum output, wire sizes and spool capacity against the material you actually use before paying for extra modes. At the observed EUR 399.00 price, compare the complete working setup before choosing this model.
Duty cycle
Not recorded; confirm exact model manual
Price basis
Observed official product-page price on 15 October 2026; confirm VAT, freight and included equipment at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Gas-shielded MIG adds cylinder rental or purchase, regulator and wire costs. Confirm torch connector, spare tips and drive rolls locally; a low machine price does not establish long-term running cost. Supply voltage and circuit requirements still need confirmation. A comparable temperature-rated duty cycle was not recorded.
Compare VECTOR MIG165 for steel repairs and short workshop projects. Check minimum output, wire sizes and spool capacity against the material you actually use before paying for extra modes. At the observed EUR 229.00 price, compare the complete working setup before choosing this model.
Duty cycle
duty cycle (ED) MIG / MAG 40 ° C: 165 A at 22 V 60%
Price basis
Observed official product-page price on 15 October 2026; confirm VAT, freight and included equipment at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Gas-shielded MIG adds cylinder rental or purchase, regulator and wire costs. Confirm torch connector, spare tips and drive rolls locally; a low machine price does not establish long-term running cost.
Compare VECTOR MIG225A for steel repairs and short workshop projects. Check minimum output, wire sizes and spool capacity against the material you actually use before paying for extra modes. At the observed EUR 399.00 price, compare the complete working setup before choosing this model.
Duty cycle
duty cycle (ED) MIG/MAG 40°C: 225 A at 25V 35%
Price basis
Observed official product-page price on 15 October 2026; confirm VAT, freight and included equipment at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Gas-shielded MIG adds cylinder rental or purchase, regulator and wire costs. Confirm torch connector, spare tips and drive rolls locally; a low machine price does not establish long-term running cost.
Price snapshots can differ by country, tax treatment, controls and included accessories. Sorting keeps each original currency separate. Read the full package and confirm an up-to-date local offer before buying. Descriptions are editorial assessments of specifications; they are not hands-on test results. Each model page keeps its references at the bottom.
A simple route into steel repairs. Compare usable output on your actual supply, electrode sizes, lead length and service support. A high advertised maximum does not describe continuous output.
For wire-feed practice, confirm whether the machine is gasless-only or also supports gas MIG. Check wire diameter, polarity change, torch connector and replacement feed parts. Include gas equipment when needed.
Check DC or AC/DC before buying: DC-only TIG does not provide AC TIG for aluminium. Compare HF versus contact starting, foot-control support and the price of the torch, regulator and gas.
