Understand the AC balance control when TIG welding aluminum, including why different machines can label the same control differently.
4,141 likes454,890 views
Checked 2026-10-14 · EnglishWatch on YouTube Selection notes & references
Understand the AC balance control when TIG welding aluminum, including why different machines can label the same control differently.
Public snapshot meets the editorial gate of at least 1,000 likes and 50,000 views. Specific explanation of AC balance and manufacturer labeling differences. This is an older tutorial; check the current manual for your own AC balance scale. Likes and views measure engagement; an approval rating is unavailable.
Follow an experienced aluminum fabricator's approach to thin 5052 sheet, filler choice and control of the weld appearance.
3,256 likes213,493 views
Checked 2026-10-14 · EnglishWatch on YouTube Selection notes & references
Follow an experienced aluminum fabricator's approach to thin 5052 sheet, filler choice and control of the weld appearance.
Public snapshot meets the editorial gate of at least 1,000 likes and 50,000 views. Creator identifies demonstrator Brad Goodman and the example alloy, thickness and filler. Appearance alone does not verify weld soundness or code compliance. Likes and views measure engagement; an approval rating is unavailable.
Work through aluminum TIG preparation, torch setup, machine controls, filler addition and a tee joint in a chaptered introduction.
2,327 likes99,012 views
Checked 2026-10-14 · EnglishWatch on YouTube Selection notes & references
Work through aluminum TIG preparation, torch setup, machine controls, filler addition and a tee joint in a chaptered introduction.
Public snapshot meets the editorial gate of at least 1,000 likes and 50,000 views. Published chapters cover tungsten, torch setup, settings, preparation and filler. The creator discloses affiliate links. Settings are demonstrations, not a welding procedure. Likes and views measure engagement; an approval rating is unavailable.
Each published tutorial has at least 1,000 verified public likes and 50,000 views, alongside a relevant learning topic. Counts are dated snapshots of public engagement, rather than star ratings or independent technical tests.
Selection notes use creator descriptions, chapters and companion material. Follow the instructions for your exact equipment and consumables, and use the qualified training and procedure required for the work.
Welding video tutorials: MIG, TIG & stick | Welding Devices