Browse 500 machines by process, electrical supply and price. Start with a budget ceiling, then compare up to three models side by side.
More filters
Choose a currency to filter by purchase price. Currencies are kept separate; no exchange-rate conversion.
375 machines of 500
Select up to three machines to compare. Prices are dated offers for the named market and package. Price ceilings use each machine’s recorded reference price. Open shop prices for separate EU, UK and US listings. The catalogue is an editorial selection, not a numbered performance ranking.
120V or 240V input (verify circuit and process-specific output in the manual)
US$559.00United States
Quick details
Lower purchase-price candidate for a first-machine shortlist. MIG / flux-cored capability must fit the actual materials and supply; compare the complete setup cost before ordering.
Duty cycle
Not verified in extracted specifications; consult exact-model manual.
Price basis
Manufacturer US listed price checked 15 October 2026; confirm tax, shipping and exact package at checkout.
Package
Manufacturer storefront package: AlphaMIG 190 SYN. Confirm the complete included list and gas requirements before ordering.
Considerations
Compare total ready-to-weld cost, consumables and local repair support. A listed maximum output is not a continuous-duty rating; use the exact manual for circuit and duty-cycle planning.
120V or 240V input (verify circuit and process-specific output in the manual)
US$679.00United States
Quick details
Lower purchase-price candidate for a first-machine shortlist. MIG / TIG / stick capability must fit the actual materials and supply; compare the complete setup cost before ordering.
Duty cycle
Not verified in extracted specifications; consult exact-model manual.
Price basis
Manufacturer US listed price checked 15 October 2026; confirm tax, shipping and exact package at checkout.
Package
Manufacturer storefront package: AlphaMIG 190mp. Confirm the complete included list and gas requirements before ordering.
Considerations
Compare total ready-to-weld cost, consumables and local repair support. A listed maximum output is not a continuous-duty rating; use the exact manual for circuit and duty-cycle planning.
120/240V input (verify circuit and process-specific output in the manual)
US$759.00United States
Quick details
Lower purchase-price candidate for a first-machine shortlist. Pulse MIG / DC TIG / stick capability must fit the actual materials and supply; compare the complete setup cost before ordering.
Duty cycle
Not verified in extracted specifications; consult exact-model manual.
Price basis
Manufacturer US listed price checked 15 October 2026; confirm tax, shipping and exact package at checkout.
Package
Manufacturer storefront package: AlphaMIG 202 Pulse. Confirm the complete included list and gas requirements before ordering.
Considerations
DC TIG is intended for suitable steel/stainless work; do not assume AC aluminium TIG. Add the specified torch, gas supply and control accessories to the budget; confirm duty cycle at the intended current.
120/ 240v input (verify circuit and process-specific output in the manual)
US$870.00United States
Quick details
Lower purchase-price candidate for a first-machine shortlist. AC/DC TIG / stick capability must fit the actual materials and supply; compare the complete setup cost before ordering.
Duty cycle
60% at 200 A, as stated by manufacturer; temperature not stated in the extracted specification.
Price basis
Manufacturer US listed price checked 15 October 2026; confirm tax, shipping and exact package at checkout.
Package
Manufacturer storefront package: NEW 2026 AlphaTIG 203Xi with WIRELESS FOOT PEDAL. Confirm the complete included list and gas requirements before ordering.
Considerations
Compare total ready-to-weld cost, consumables and local repair support. A listed maximum output is not a continuous-duty rating; use the exact manual for circuit and duty-cycle planning.
120V/240V input (verify circuit and process-specific output in the manual)
US$895.00United States
Quick details
Lower purchase-price candidate for a first-machine shortlist. AC/DC TIG / stick capability must fit the actual materials and supply; compare the complete setup cost before ordering.
Duty cycle
Not verified in extracted specifications; consult exact-model manual.
Price basis
Manufacturer US listed price checked 15 October 2026; confirm tax, shipping and exact package at checkout.
Package
Manufacturer storefront package: Pre-Order NEW 2026 AlphaTIG 225Xi with WIRELESS FOOT PEDAL Estimated ship date November 20, 2026. Confirm the complete included list and gas requirements before ordering. Manufacturer storefront states estimated ship date 20 November 2026.
Considerations
Compare total ready-to-weld cost, consumables and local repair support. A listed maximum output is not a continuous-duty rating; use the exact manual for circuit and duty-cycle planning.
US$1,499.00Manufacturer international store; confirm local supply and shipping
Quick details
Compare ARCCAPTAIN AIM-Forge 250 for steel repairs and short workshop projects. Check minimum output, wire sizes and spool capacity against the material you actually use before paying for extra modes. At the observed USD 1499.00 price, compare the complete working setup before choosing this model.
Duty cycle
Not recorded; confirm exact model manual
Price basis
Observed manufacturer-store variant price on 15 October 2026; AIM-Forge Heavy-Duty Welder. Confirm tax, freight, import charges and selected plug at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Gas-shielded MIG adds cylinder rental or purchase, regulator and wire costs. Confirm torch connector, spare tips and drive rolls locally; a low machine price does not establish long-term running cost. Supply voltage and circuit requirements still need confirmation. A comparable temperature-rated duty cycle was not recorded.
US$759.99Manufacturer international store; confirm local supply and shipping
Quick details
Compare ARCCAPTAIN MIG205MP for steel repairs and short workshop projects. Check minimum output, wire sizes and spool capacity against the material you actually use before paying for extra modes. At the observed USD 759.99 price, compare the complete working setup before choosing this model.
Duty cycle
Not recorded; confirm exact model manual
Price basis
Observed manufacturer-store variant price on 15 October 2026; MIG205MP (All In One Welder). Confirm tax, freight, import charges and selected plug at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Gas-shielded MIG adds cylinder rental or purchase, regulator and wire costs. Confirm torch connector, spare tips and drive rolls locally; a low machine price does not establish long-term running cost. Supply voltage and circuit requirements still need confirmation. A comparable temperature-rated duty cycle was not recorded.
MIG/MAG, flux-cored, MMA/stick, DC Lift TIG, plasma cutting
Not recorded; confirm exact model manual
US$699.99Manufacturer international store; confirm local supply and shipping
Quick details
Compare ARCCAPTAIN MIG205PCT for steel repairs and short workshop projects. Check minimum output, wire sizes and spool capacity against the material you actually use before paying for extra modes. At the observed USD 699.99 price, compare the complete working setup before choosing this model.
Duty cycle
Not recorded; confirm exact model manual
Price basis
Observed manufacturer-store variant price on 15 October 2026; Default Title. Confirm tax, freight, import charges and selected plug at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Gas-shielded MIG adds cylinder rental or purchase, regulator and wire costs. Confirm torch connector, spare tips and drive rolls locally; a low machine price does not establish long-term running cost. Supply voltage and circuit requirements still need confirmation. A comparable temperature-rated duty cycle was not recorded.
US$649.99Manufacturer international store; confirm local supply and shipping
Quick details
Compare ARCCAPTAIN TIG200P AC/DC for controlled fabrication and repair work. Match DC or AC capability to the base metal and confirm torch, pedal and starting method for the exact package. At the observed USD 649.99 price, compare the complete working setup before choosing this model.
Duty cycle
Duty cycle (%): % / TIG: 200@25% - MMA: 160@25% (manufacturer percentage; corresponding current and test temperature not captured)
Price basis
Observed manufacturer-store variant price on 15 October 2026; TIG200P AC DC Aluminum Welder (Save $250). Confirm tax, freight, import charges and selected plug at checkout.
Package
Exact package varies: compare supplied torch/holder, work lead, regulator, TIG accessories and plug. Accessories and regional packages are not counted as separate power sources. Availability is a 15 October 2026 snapshot; package and checkout price can change.
Considerations
Argon, tungsten, filler rod and suitable PPE add to the machine price. Confirm low-current control and pedal compatibility in the manual; a model number is not a continuous-output rating. Supply voltage and circuit requirements still need confirmation.
230 V ±10%, single phase, 50/60 Hz (linked CE product specification)
Request a quoteEurope; verify the local supply and order code
Quick details
Editorial inference from published specifications: A multiprocess workshop option where AC TIG is also needed and buying separate MIG and TIG power sources would consume space or capital.
Duty cycle
MIG: 205 A / 24.3 V at 25%; 125 A at 60%; 110 A at 100%. TIG AC/DC: 205 A at 25%. Product page does not state the test temperature.
Price basis
No verified retail price. Request an itemized quotation.
Package
Confirm the seller’s exact torch, cables, regulator, consumables and cooling package before ordering.
Considerations
Check the CE supply variant and package; international pages describe different input configurations. Sustained output is lower than maximum amperage.
Weight
25.5 kg
TIG range
AC 10–205 A; DC 5–205 A
MMA rating
170 A at 25%; 100 A at 100%
Wire feed
2.0–12.1 m/min
TIG controls
HF or Lift TIG; adjustable AC balance/frequency and DC pulse
Request a quoteEurope; verify the local supply and order code
Quick details
Editorial inference from published specifications: A compact multiprocess option for mixed repair and fabrication work when assisted MIG setup and a single machine are useful.
Duty cycle
MIG at 230 V: 205 A / 24.3 V at 25%. MMA 180 A at 25%; TIG 180 A at 30%. Linked product page does not state test temperature.
Price basis
No verified retail price. Request an itemized quotation.
Package
CE brochure describes a MIG torch, electrode and return leads, wire, gas hose, tips and rollers; quoted contents can vary. Confirm TIG torch, pedal and regulator separately.
Considerations
Lift TIG is DC only. Product page and older brochure show different weights; confirm the delivered generation and package.
Weight on linked product page
20.6 kg
Older brochure weight
18.2 kg; confirm the delivered version
Wire feed
1.5–12.1 m/min
Spools
100 or 200 mm
Wire sizes
Steel 0.6–1.0 mm; stainless 0.8–1.0 mm; aluminum/flux-cored 0.8–1.2 mm
Request a quoteEurope; verify the local supply and order code
Quick details
Editorial inference from published specifications: A stick-first portable machine for site repair and maintenance when electrode work takes priority over advanced TIG controls.
Duty cycle
MMA at 230 V: 210 A / 28.4 V at 25%; 135 A at 60%; 105 A at 100%. Test temperature is not stated on the linked product page.
Price basis
No verified retail price. Request an itemized quotation.
Package
Manufacturer highlights include a Handy 200 electrode holder. Confirm return lead, optional valve TIG torch, regulator and remote control in the exact quoted package.
Considerations
No MIG wire feed or AC TIG. The product page’s MMA adjustment-range line conflicts with its 210 A output line; confirm the rating plate.
230–480 V ±10%, three phase; 230 V ±10% single-phase operation with reduced maximum output
Request a quoteEurope; verify the local supply and order code
Quick details
Editorial inference from published specifications: A mobile industrial stick source where sustained electrode welding and three-phase access justify the additional capacity.
Duty cycle
MMA: 300 A / 32 V at 40%; 250 A at 60%; 200 A at 100% on the three-phase rating. Product page does not state the test temperature.
Price basis
No verified retail price. Request an itemized quotation.
Package
Confirm the seller’s exact torch, cables, regulator, consumables and cooling package before ordering.
Considerations
Three-phase input is needed for the headline 300 A rating; single-phase operation is limited to the lower output range. No MIG or AC TIG.
Weight
15 kg
Three-phase current range
5–300 A
Single-phase maximum range
5–200 A
Electrode sizes
Manufacturer describes use up to 6 mm
Dimensions
460 × 200 × 320 mm
Enclosure
IP23
TIG output on the product page
300 A at 60%; confirm the serial-specific manual before relying on this rating
€2,050.00Latvia seller listing; European specification
Quick details
Editorial inference from published specifications: A portable dedicated TIG source for site fabrication, with a standard torch package and optional water cooling.
Duty cycle
TIG at 230 V: 210 A / 18.4 V at 25%; 135 A at 60%; 105 A at 100%. Product page does not state the test temperature.
Price basis
INDUSTAR listed EUR price including VAT; delivery and any selected options must be confirmed. Source checked 14 October 2026.
Package
Listed air-cooled package includes power source, 3 m work lead, 4 m SR-B26 TIG torch, 4 m gas hose and shoulder strap. Confirm gas regulator and remote controls separately.
Considerations
DC TIG only. On 115 V, TIG is 140 A at 25%; high-current continuous TIG is limited to 105 A.
Weight
11 kg
TIG range at 230 V
10–210 A
Pulse
DC TIG pulse up to 999 Hz
MMA rating at 230 V
210 A at 25%; 105 A at 100%
Cooling
Gas-cooled standard model; separate W/EC1001 water-cooled version
€2,350.00Latvia seller listing; European specification
Quick details
Editorial inference from published specifications: A portable TIG option for users who value a color interface and more direct setup controls over the standard 210iP.
Duty cycle
TIG at 230 V: 210 A / 18.4 V at 25%; 135 A at 60%; 105 A at 100%. Product page does not state the test temperature.
Price basis
INDUSTAR listed EUR price including VAT; delivery and any selected options must be confirmed. Source checked 14 October 2026.
Package
Air-cooled Advanced kit lists power source, 3 m return lead, 4 m Exeor TIG SR17 torch, 4 m gas hose and strap. Water-cooled W package and remote controls are separate.
Considerations
Its advanced interface does not increase the published thermal rating. DC TIG only; the optional W cooler package costs extra.
Weight
11 kg
TIG range at 230 V
10–210 A
Pulse
DC TIG pulse up to 999 Hz
Display
Color-screen advanced interface
Cooling
Standard gas-cooled model; optional EC1001 water cooler
230–480 V ±10%, three phase; 230 V ±10%, single phase; 50/60 Hz
€2,990.00Latvia seller listing; European specification
Quick details
Editorial inference from published specifications: A transportable higher-output TIG source for workshops and site jobs with suitable three-phase supply.
Duty cycle
2022 manual, three phase, 40°C / 10 minutes: TIG 300 A / 22 V at 40%; 250 A at 60%; 200 A at 100%.
Price basis
INDUSTAR listed EUR price including VAT; delivery and any selected options must be confirmed. Source checked 14 October 2026.
Package
Seller identifies the model without liquid cooling; lists mains cable/plug, return cable and gas hoses. TIG torches appear as accessories, so confirm whether a torch is included in the quote.
Considerations
The family product page shows a different TIG duty rating. This record uses the 2022 manual; confirm your serial-specific rating. ET300i is the non-pulse model.
230–480 V ±10%, three phase; 230 V ±10%, single phase; 50/60 Hz
Request a quoteEurope; verify the local supply and order code
Quick details
Editorial inference from published specifications: The pulsed counterpart to the ET300i suits TIG users who need pulse control and industrial three-phase output.
Duty cycle
2022 manual, three phase, 40°C / 10 minutes: TIG 300 A / 22 V at 40%; 250 A at 60%; 200 A at 100%.
Price basis
No verified retail price. Request an itemized quotation.
Package
Confirm the seller’s exact torch, cables, regulator, consumables and cooling package before ordering.
Considerations
The shared product page and 2022 manual disagree on top TIG duty cycle. Verify the serial-specific manual; cooler and torch packages vary.
DC MMA, DC Live TIG; mains, battery and AMP+ hybrid modes
120/230 V ±15%, single phase, 50/60 Hz; detachable battery box
Request a quoteEurope; verify the local supply and order code
Quick details
Editorial inference from published specifications: A specialized mobile stick source when access to power is part of the job cost; compare battery kit cost with a mains-only alternative.
Duty cycle
MMA on 230 V mains, 40°C / 10 minutes: 200 A / 28 V at 25%; 129 A at 60%; 100 A at 100%. Battery-only: 130 A at 18%.
Price basis
No verified retail price. Request an itemized quotation.
Package
Request an exact quote identifying power source, battery box, four compatible batteries, chargers, leads and any TIG accessories; do not compare bare-source and full-system prices.
Considerations
Battery-only output and runtime are lower than mains ratings. AC in the input/mode table describes mains power, not AC TIG output.
€1,620.00Latvia seller listing; European specification
Quick details
Editorial inference from published specifications: A portable single-phase option for repair work and mixed MIG/stick jobs. Compare its sustained output with the actual work cycle.
Duty cycle
MIG at 230 V: 210 A / 24.5 V at 30%; 136 A at 60%; 105 A at 100%. March 2026 CE factsheet; test temperature is not stated in that sheet.
Price basis
INDUSTAR listed EUR price including VAT; delivery and any selected options must be confirmed. Source checked 14 October 2026.
Package
Seller lists a 3 m MXL201 MIG torch, 3 m electrode-holder lead, 3 m return lead and V-groove rollers. Confirm gas hose, regulator and TIG accessories; the manufacturer’s March 2026 kit lists a different torch.
Considerations
DC Lift TIG does not provide AC TIG. Different market/manual editions show different top-duty ratings; verify the supplied CE order code and rating plate.
€715.00Latvia seller listing; European specification
Quick details
Editorial inference from published specifications: A compact stick-first choice for occasional repairs or mobile work; a TIG setup can be added when DC Live TIG is sufficient.
Duty cycle
MMA at 230 V, 40°C / 10 minutes: 200 A / 28 V at 25%; 129 A at 60%; 100 A at 100%.
Price basis
INDUSTAR listed EUR price including VAT; delivery and any selected options must be confirmed. Source checked 14 October 2026.
Package
The listing heading identifies the new ES 201iP PRO CE although the URL retains the old 200i name. Manufacturer delivery lists return lead, electrode-holder lead and shoulder strap; confirm the order code and TIG extras with the seller.
Considerations
Live TIG is a simpler ignition method than a dedicated HF TIG system; the 200 A headline is a 25% rating.
€990.00Latvia seller listing; European specification
Quick details
Editorial inference from published specifications: A small dedicated TIG machine for intermittent steel or stainless jobs when HF ignition and pulse controls matter.
Duty cycle
DC TIG at 230 V, 40°C / 10 minutes: 180 A / 17.2 V at 25%; 116 A at 60%; 90 A at 100%.
Price basis
INDUSTAR listed EUR price including VAT; delivery and any selected options must be confirmed. Source checked 14 October 2026.
Package
Manufacturer delivery includes a TIG torch, return lead and gas hose. Seller heading is 181iP while the URL retains 180i; confirm model code, supplied torch and regulator before buying.
Considerations
DC output does not provide AC TIG; MMA is rated 170 A at 20%, below the TIG headline.
€1,295.00Latvia seller listing; European specification
Quick details
Editorial inference from published specifications: A portable TIG-first choice for workshops needing HF ignition and adjustable pulse with more output than the 181iP.
Duty cycle
TIG at 230 V, 40°C / 10 minutes: 200 A / 18 V at 25%; 129 A at 60%; 100 A at 100%. MMA also 200 A at 25%.
Price basis
INDUSTAR listed EUR price including VAT; delivery and any selected options must be confirmed. Source checked 14 October 2026.
Package
Manufacturer delivery includes TIG torch, return lead and gas hose. Confirm the seller supplies 201iP PRO CE, because the URL retains the previous 200iP name, and confirm any remote or regulator extras.
Considerations
Low-voltage operation reduces TIG to 140 A at 25%; DC TIG does not supply AC TIG.
Weight
9.6 kg
230 V current range
TIG 10–200 A
TIG pulse
Adjustable up to 500 Hz
TIG controls
Pre/post gas, starting/finishing current and slopes; 2T/4T
€3,550.00Latvia seller listing; European specification
Quick details
Editorial inference from published specifications: A TIG-focused single-phase option when both AC and DC output are needed, with control over pulse and AC waveform.
Duty cycle
TIG at 230 V: 230 A / 19.2 V at 30%; 163 A at 60%; 126 A at 100%. Linked January 2025 factsheet does not state the test temperature.
Price basis
INDUSTAR listed EUR price including VAT; delivery and any selected options must be confirmed. Source checked 14 October 2026.
Package
Seller lists the standard power source, 3 m return lead, 4 m Exeor TIG SR17 torch and 4 m gas hose. Cooler, foot control and gas regulator require separate confirmation; this price is not the W kit.
Considerations
The standard gas-cooled kit and the water-cooled W kit have different prices. 115 V TIG output is 125 A at 30%.
Weight
19 kg
TIG range at 230 V
DC 5–230 A; AC 15–230 A
MMA rating at 230 V
180 A at 30%; 99 A at 100%
Pulse
AC and DC TIG up to 200 Hz
Cooling
Optional CoolMini 3; W version includes the cooler
Request a quoteEurope; verify the local supply and order code
Quick details
Editorial inference from published specifications: A wheeled workshop machine for higher-output wire welding where three-phase supply and larger spools are available.
Duty cycle
MIG: 350 A / 31.5 V at 40%; MMA: 320 A / 32.8 V at 40%. Linked product page does not state the test temperature.
Price basis
No verified retail price. Request an itemized quotation.
Package
Confirm whether the quote is source-only 0448350991 or the torch/toolbox package 0448350881. Do not substitute a Synergic, Pulse or 350Cw water-cooled package price.
Considerations
The basic PRO, Synergic, Pulse and water-cooled versions have distinct order codes and weights; obtain a quote for the exact basic model.
Price snapshots can differ by country, tax treatment, controls and included accessories. Sorting keeps each original currency separate. Read the full package and confirm an up-to-date local offer before buying. Descriptions are editorial assessments of specifications; they are not hands-on test results. Each model page keeps its references at the bottom.
500 welding machines: budget & professional comparisons | Welding Devices
