Choose your market, then filter by process, supply and budget. Stock evidence expires after 72 hours.
US seller listings; sales tax and delivery depend on your destination. Canadian stock is not counted as US stock. The target is 200 distinct models per market. Only models passing the stock-evidence check appear; gaps remain visible.
More filters
Choose a currency to filter by purchase price. Currencies are kept separate; no exchange-rate conversion.
75 machines
Select up to three machines to compare. Prices are dated offers for the named market and package. Price ceilings use the current eligible seller offer. Confirm the exact country and package with the seller. The catalogue is an editorial selection, not a numbered performance ranking.
120V or 240V input (verify circuit and process-specific output in the manual)
US$559.00United States
Quick details
Lower purchase-price candidate for a first-machine shortlist. MIG / flux-cored capability must fit the actual materials and supply; compare the complete setup cost before ordering.
Duty cycle
Not verified in extracted specifications; consult exact-model manual.
Price basis
Tax basis not verified Confirm delivery destination and cost at checkout.
Package
Exact seller package; confirm included accessories
Considerations
Compare total ready-to-weld cost, consumables and local repair support. A listed maximum output is not a continuous-duty rating; use the exact manual for circuit and duty-cycle planning.
120/240V input (verify circuit and process-specific output in the manual)
US$759.00United States
Quick details
Lower purchase-price candidate for a first-machine shortlist. Pulse MIG / DC TIG / stick capability must fit the actual materials and supply; compare the complete setup cost before ordering.
Duty cycle
Not verified in extracted specifications; consult exact-model manual.
Price basis
Tax basis not verified Confirm delivery destination and cost at checkout.
Package
Exact seller package; confirm included accessories
Considerations
DC TIG is intended for suitable steel/stainless work; do not assume AC aluminium TIG. Add the specified torch, gas supply and control accessories to the budget; confirm duty cycle at the intended current.
230–480 V ±10%, three phase; 230 V ±10% single-phase operation with reduced maximum output
US$4,530.00United States
Quick details
Editorial inference from published specifications: A mobile industrial stick source where sustained electrode welding and three-phase access justify the additional capacity.
Duty cycle
MMA: 300 A / 32 V at 40%; 250 A at 60%; 200 A at 100% on the three-phase rating. Product page does not state the test temperature.
Price basis
US advertised price; destination sales-tax basis not verified US supplier. Confirm destination eligibility, sales tax and delivery charges at checkout.
Package
Exact seller package; included accessories require confirmation · Published listing: ESAB Renegade ES 300i Stick Welder - 0445100881. Exact order code: ESA0445100881. Confirm the electrical version, included accessories and current warranty with seller.
Considerations
Three-phase input is needed for the headline 300 A rating; single-phase operation is limited to the lower output range. No MIG or AC TIG.
Weight
15 kg
Three-phase current range
5–300 A
Single-phase maximum range
5–200 A
Electrode sizes
Manufacturer describes use up to 6 mm
Dimensions
460 × 200 × 320 mm
Enclosure
IP23
TIG output on the product page
300 A at 60%; confirm the serial-specific manual before relying on this rating
230–480 V ±10%, three phase; 230 V ±10%, single phase; 50/60 Hz
US$7,200.00United States
Quick details
Editorial inference from published specifications: The pulsed counterpart to the ET300i suits TIG users who need pulse control and industrial three-phase output.
Duty cycle
2022 manual, three phase, 40°C / 10 minutes: TIG 300 A / 22 V at 40%; 250 A at 60%; 200 A at 100%.
Price basis
US advertised price; destination sales-tax basis not verified US supplier. Confirm destination eligibility, sales tax and delivery charges at checkout.
Package
Exact seller package; included accessories require confirmation · Published listing: ESAB Renegade ET 300iP - 0445100921. Exact order code: ESA0445100921. Confirm the electrical version, included accessories and current warranty with seller.
Considerations
The shared product page and 2022 manual disagree on top TIG duty cycle. Verify the serial-specific manual; cooler and torch packages vary.
Editorial inference from published specifications: A portable single-phase option for repair work and mixed MIG/stick jobs. Compare its sustained output with the actual work cycle.
Duty cycle
MIG at 230 V: 210 A / 24.5 V at 30%; 136 A at 60%; 105 A at 100%. March 2026 CE factsheet; test temperature is not stated in that sheet.
Price basis
US advertised price; destination sales-tax basis not verified US supplier. Confirm destination eligibility, sales tax and delivery charges at checkout.
Package
Exact seller package; included accessories require confirmation · Published listing: ESAB Rogue EMP 210 PRO Multi-Process Welder 0700301085. Exact order code: 0700301085. Confirm the electrical version, included accessories and current warranty with seller.
Considerations
DC Lift TIG does not provide AC TIG. Different market/manual editions show different top-duty ratings; verify the supplied CE order code and rating plate.
Editorial assessment from specifications: A simple tapped-voltage source for small steel projects on a US household supply.
Duty cycle
MIG: 80 A at 25%.
Price basis
US advertised price; destination sales-tax basis not verified US supplier. Confirm destination eligibility, sales tax and delivery charges at checkout.
Package
Exact seller package; included accessories require confirmation · Published listing: Hobart Handler 125 MIG Welder - 500573. Exact order code: HOB500573. Confirm the electrical version, included accessories and current warranty with seller.
Considerations
Output is 130 A maximum despite model number; limited sustained current and substantial weight. US specification: verify EU electrical compatibility, approved regional model, service and landed import cost.
Editorial assessment from specifications: Preset EZ Mode and manual voltage adjustment suit learning and intermittent small steel projects.
Duty cycle
MIG: 90 A at 30%.
Price basis
US advertised price; destination sales-tax basis not verified US supplier. Confirm destination eligibility, sales tax and delivery charges at checkout.
Package
Exact seller package; included accessories require confirmation · Published listing: Hobart Handler 140EZ MIG Welder 500582. Exact order code: 500582. Confirm the electrical version, included accessories and current warranty with seller.
Considerations
Manufacturer does not recommend engine-driven welders or standalone generators; no verified EU 50 Hz compatibility. US specification: verify EU electrical compatibility, approved regional model, service and landed import cost.
Editorial assessment from specifications: A light dual-voltage source suits a mobile workshop and occasional fabrication.
Duty cycle
240 V: 210 A at 25%; 120 V, 20 A circuit: 90 A at 25%; 15 A circuit: 45 A at 100%.
Price basis
US advertised price; destination sales-tax basis not verified US supplier. Confirm destination eligibility, sales tax and delivery charges at checkout.
Package
Exact seller package; included accessories require confirmation · Published listing: Hobart Handler 210i - 500588. Exact order code: HOB500588. Confirm the electrical version, included accessories and current warranty with seller.
Considerations
Full output depends on 240 V supply; 60 Hz listing does not establish EU 50 Hz operation. US specification: verify EU electrical compatibility, approved regional model, service and landed import cost.
Editorial assessment from specifications: Dual-voltage wire welding suits workshop repair where simple manual controls are preferred.
Duty cycle
115 V: 90 A at 20%; 230 V: 150 A at 30%.
Price basis
US advertised price; destination sales-tax basis not verified US supplier. Confirm destination eligibility, sales tax and delivery charges at checkout.
Package
Exact seller package; included accessories require confirmation · Published listing: Hobart Handler 210MVP MIG Welder - 500553. Exact order code: HOB500553. Confirm the electrical version, included accessories and current warranty with seller.
Considerations
79 lb is much heavier than the newer 210i; 60 Hz variant requires regional verification. US specification: verify EU electrical compatibility, approved regional model, service and landed import cost.
Not verified in extracted specifications; consult exact-model manual.
US$2,749.99United States
Quick details
Champion 145 Recoil is a manufacturer-listed Stick (SMAW); engine driven option. Match its confirmed supply and process configuration to the work before shortlisting.
Duty cycle
130 A @ 30% Duty Cycle
Price basis
US advertised price; destination sales-tax basis not verified US supplier. Confirm destination eligibility, sales tax and delivery charges at checkout.
Package
Exact seller package; included accessories require confirmation · Published listing: Hobart Champion 145 Welder 500563. Exact order code: 500563. Confirm the electrical version, included accessories and current warranty with seller.
Considerations
This is a mobile jobsite power system. Plan fuel, maintenance, safe exhaust placement and transport capacity; generator output and welding duty cycle are separate ratings. Confirm the quoted engine and accessory configuration.
Not verified in extracted specifications; consult exact-model manual.
US$4,899.99United States
Quick details
Champion Elite 225 is a manufacturer-listed Engine-driven welding power source; engine driven option. Match its confirmed supply and process configuration to the work before shortlisting.
Duty cycle
225 A @ 100% Duty Cycle
Price basis
US advertised price; destination sales-tax basis not verified US supplier. Confirm destination eligibility, sales tax and delivery charges at checkout.
Package
Exact seller package; included accessories require confirmation · Published listing: Hobart Champion Elite 225 Welder/Generator - 500580. Exact order code: HOB500580. Confirm the electrical version, included accessories and current warranty with seller.
Considerations
This is a mobile jobsite power system. Plan fuel, maintenance, safe exhaust placement and transport capacity; generator output and welding duty cycle are separate ratings. Confirm the quoted engine and accessory configuration.
Ironman 240 is a manufacturer-listed Flux Cored (FCAW) / MIG (GMAW) option. Match its confirmed supply and process configuration to the work before shortlisting.
Duty cycle
200 A @ 60% duty cycle
Price basis
US advertised price; destination sales-tax basis not verified US supplier. Confirm destination eligibility, sales tax and delivery charges at checkout.
Package
Exact seller package; included accessories require confirmation · Published listing: Hobart IronMan 240 MIG Welder 500574. Exact order code: 500574. Confirm the electrical version, included accessories and current warranty with seller.
Considerations
Compare total ready-to-weld cost, consumables and local repair support. A listed maximum output is not a continuous-duty rating; use the exact manual for circuit and duty-cycle planning.
Multi Handler 200 is a manufacturer-listed Flux Cored (FCAW) / MIG (GMAW) / Stick (SMAW) / TIG DC (GTAW-DC) option. Match its confirmed supply and process configuration to the work before shortlisting.
Duty cycle
Not verified in extracted specifications; consult exact-model manual.
Price basis
US advertised price; destination sales-tax basis not verified US supplier. Confirm destination eligibility, sales tax and delivery charges at checkout.
Package
Exact seller package; included accessories require confirmation · Published listing: Hobart Multi-Handler 200 Multiprocess Welder - 500578. Exact order code: HOB500578. Confirm the electrical version, included accessories and current warranty with seller.
Considerations
Compare total ready-to-weld cost, consumables and local repair support. A listed maximum output is not a continuous-duty rating; use the exact manual for circuit and duty-cycle planning.
Stickmate 160 is a manufacturer-listed Stick (SMAW) option. Match its confirmed supply and process configuration to the work before shortlisting.
Duty cycle
120V: 80 A @ 15% duty cycle
240V: 160 A @ 15% duty cycle
Price basis
US advertised price; destination sales-tax basis not verified US supplier. Confirm destination eligibility, sales tax and delivery charges at checkout.
Package
Exact seller package; included accessories require confirmation · Published listing: Hobart Stickmate 160 DC Stick Welder - 500585. Exact order code: HOB500585. Confirm the electrical version, included accessories and current warranty with seller.
Considerations
Compare total ready-to-weld cost, consumables and local repair support. A listed maximum output is not a continuous-duty rating; use the exact manual for circuit and duty-cycle planning.
Rated Output
120V: 80 A @ 15% duty cycle
240V: 160 A @ 15% duty cycle
Editorial assessment from specifications: Simple dual-voltage wire welding suits repair work and a small workshop.
Duty cycle
MIG: 175 A at 30% on the 230 V supply.
Price basis
US advertised price; destination sales-tax basis not verified US supplier. Confirm destination eligibility, sales tax and delivery charges at checkout.
Package
Exact seller package; included accessories require confirmation · Published listing: Lincoln POWER MIG 211i MIG Welder - K6080-1. Exact order code: LINK6080-1. Confirm the electrical version, included accessories and current warranty with seller.
Considerations
No TIG or stick capability; 60 Hz source listing does not verify EU 50 Hz operation. US specification: verify EU electrical compatibility, approved regional model, service and landed import cost.
Editorial assessment from specifications: Multiprocess capability and stored settings suit mixed small-shop fabrication and repair.
Duty cycle
Manufacturer rated output: 215 A at 24.8 V, 30% duty cycle on 230 V.
Price basis
US advertised price; destination sales-tax basis not verified US supplier. Confirm destination eligibility, sales tax and delivery charges at checkout.
Package
Exact seller package; included accessories require confirmation · Published listing: Lincoln POWER MIG 215 MPi Multi-Process Welder - K4876-1. Exact order code: LINK4876-1. Confirm the electrical version, included accessories and current warranty with seller.
Considerations
DC TIG excludes AC aluminium TIG; this 60 Hz US model needs regional supply verification. US specification: verify EU electrical compatibility, approved regional model, service and landed import cost.
Editorial assessment from specifications: A portable DC stick/TIG source suits mobile steel repair and intermittent TIG work.
Duty cycle
230 V: TIG 200 A at 25%, stick 180 A at 25%; 120 V: TIG 110 A at 40%, stick 85 A at 40%.
Price basis
US advertised price; destination sales-tax basis not verified US supplier. Confirm destination eligibility, sales tax and delivery charges at checkout.
Package
Exact seller package; included accessories require confirmation · Published listing: Lincoln Sprinter 180Si Stick Welder - K5453-1. Exact order code: LINK5453-1. Confirm the electrical version, included accessories and current warranty with seller.
Considerations
No AC aluminium TIG; 60 Hz variant requires supply verification, and MSRP is not a retailer offer. US specification: verify EU electrical compatibility, approved regional model, service and landed import cost.
Editorial assessment from specifications: AC waveform controls and program storage suit repeat precision TIG work across materials.
Duty cycle
208–480 V: TIG 210 A at 60%, 175 A at 100%; stick 160 A at 60%.
Price basis
US advertised price; destination sales-tax basis not verified US supplier. Confirm destination eligibility, sales tax and delivery charges at checkout.
Package
Exact seller package; included accessories require confirmation · Published listing: Miller Dynasty 210 - 907816. Exact order code: MIL907816. Confirm the electrical version, included accessories and current warranty with seller.
Considerations
120 V reduces available output; source-only pricing must include the torch/control system. US specification: verify EU electrical compatibility, approved regional model, service and landed import cost.
Editorial assessment from specifications: A 5.9 kg source suits mobile DC TIG or stick repair when portability matters.
Duty cycle
240 V: TIG/stick 160 A at 20%, 110 A at 100%; 120 V: TIG 130 A at 30%, stick 90 A at 30%.
Price basis
US advertised price; destination sales-tax basis not verified US supplier. Confirm destination eligibility, sales tax and delivery charges at checkout.
Package
Exact seller package; included accessories require confirmation · Published listing: Miller Maxstar 161 STL Standard Package - 907710. Exact order code: MIL907710. Confirm the electrical version, included accessories and current warranty with seller.
Considerations
STL uses Lift TIG, not the STH model’s HF start; no AC aluminium TIG. US specification: verify EU electrical compatibility, approved regional model, service and landed import cost.
Air Carbon Arc Cutting and Gouging (CAC-A) / Flux Cored (FCAW) / MIG (GMAW) / Pulsed MIG (GMAW-P) / Regulated Metal Deposition (RMD) / Stick (SMAW) / TIG DC (GTAW-DC); engine driven
Not verified in extracted specifications; consult exact-model manual.
US$31,493.00United States
Quick details
Big Blue 400 PipePro Mitsubishi Blue w/ Wireless Interface Control is a manufacturer-listed Air Carbon Arc Cutting and Gouging (CAC-A) / Flux Cored (FCAW) / MIG (GMAW) / Pulsed MIG (GMAW-P) / Regulated Metal Deposition (RMD) / Stick (SMAW) / TIG DC (GTAW-DC); engine driven option. Match its confirmed supply and process configuration to the work before shortlisting.
Duty cycle
300 A at 32 VDC, 350 A at 27 VDC, 400 A at 24 VDC
Price basis
US advertised price; destination sales-tax basis not verified US supplier. Confirm destination eligibility, sales tax and delivery charges at checkout.
Package
Exact seller package; included accessories require confirmation · Published listing: Miller Big Blue 400 PipePro (Mitsubishi) w/ ArcReach & WIC - 907805001. Exact order code: MIL907805001. Confirm the electrical version, included accessories and current warranty with seller.
Considerations
This is a mobile jobsite power system. Plan fuel, maintenance, safe exhaust placement and transport capacity; generator output and welding duty cycle are separate ratings. Confirm the quoted engine and accessory configuration.
Air Carbon Arc Cutting and Gouging (CAC-A) / Flux Cored (FCAW) / MIG (GMAW) / Pulsed MIG (GMAW-P) / Regulated Metal Deposition (RMD) / Stick (SMAW) / TIG DC (GTAW-DC); engine driven
Not verified in extracted specifications; consult exact-model manual.
US$26,642.00United States
Quick details
Big Blue 400 Pro ArcReach Kubota is a manufacturer-listed Air Carbon Arc Cutting and Gouging (CAC-A) / Flux Cored (FCAW) / MIG (GMAW) / Pulsed MIG (GMAW-P) / Regulated Metal Deposition (RMD) / Stick (SMAW) / TIG DC (GTAW-DC); engine driven option. Match its confirmed supply and process configuration to the work before shortlisting.
Duty cycle
400 A at 24 V, 100% Duty Cycle,350 A at 27 V, 100% Duty Cycle,300 A at 32 V, 100% Duty Cycle
Price basis
US advertised price; destination sales-tax basis not verified US supplier. Confirm destination eligibility, sales tax and delivery charges at checkout.
Package
Exact seller package; included accessories require confirmation · Published listing: Miller Big Blue 400 Pro (Kubota) ArcReach - 907732001. Exact order code: MIL907732001. Confirm the electrical version, included accessories and current warranty with seller.
Considerations
This is a mobile jobsite power system. Plan fuel, maintenance, safe exhaust placement and transport capacity; generator output and welding duty cycle are separate ratings. Confirm the quoted engine and accessory configuration.
Rated Output
400 A at 24 V, 100% Duty Cycle,350 A at 27 V, 100% Duty Cycle,300 A at 32 V, 100% Duty Cycle
Air Carbon Arc Cutting and Gouging (CAC-A) / Stick (SMAW) / TIG DC (GTAW-DC); engine driven
Not verified in extracted specifications; consult exact-model manual.
US$34,274.00United States
Quick details
Big Blue 450 Duo CST is a manufacturer-listed Air Carbon Arc Cutting and Gouging (CAC-A) / Stick (SMAW) / TIG DC (GTAW-DC); engine driven option. Match its confirmed supply and process configuration to the work before shortlisting.
Duty cycle
Separate (Dual Outputs) 175 A at 27 V, 100% duty cycle,Paralleled (Single Output) 350 A at 27 V, 100% duty cycle
Price basis
US advertised price; destination sales-tax basis not verified US supplier. Confirm destination eligibility, sales tax and delivery charges at checkout.
Package
Exact seller package; included accessories require confirmation · Published listing: Miller Big Blue 450 Duo CST - 907866. Exact order code: MIL907866. Confirm the electrical version, included accessories and current warranty with seller.
Considerations
This is a mobile jobsite power system. Plan fuel, maintenance, safe exhaust placement and transport capacity; generator output and welding duty cycle are separate ratings. Confirm the quoted engine and accessory configuration.
Rated Output
Separate (Dual Outputs) 175 A at 27 V, 100% duty cycle,Paralleled (Single Output) 350 A at 27 V, 100% duty cycle
Air Carbon Arc Cutting and Gouging (CAC-A) / Flux Cored (FCAW) / MIG (GMAW) / Pulsed MIG (GMAW-P) / Regulated Metal Deposition (RMD) / Stick (SMAW) / TIG DC (GTAW-DC); engine driven
Not verified in extracted specifications; consult exact-model manual.
US$44,046.00United States
Quick details
Big Blue 500 Pro ArcReach Kubota is a manufacturer-listed Air Carbon Arc Cutting and Gouging (CAC-A) / Flux Cored (FCAW) / MIG (GMAW) / Pulsed MIG (GMAW-P) / Regulated Metal Deposition (RMD) / Stick (SMAW) / TIG DC (GTAW-DC); engine driven option. Match its confirmed supply and process configuration to the work before shortlisting.
Duty cycle
400 A at 36 V, 100% duty cycle / 450 A at 38 V, 100% duty cycle / 500 A at 40 V, 100% duty cycle
Price basis
US advertised price; destination sales-tax basis not verified US supplier. Confirm destination eligibility, sales tax and delivery charges at checkout.
Package
Exact seller package; included accessories require confirmation · Published listing: Miller Big Blue 500 Pro (Kubota) Deluxe w/ ArcReach - 907736001. Exact order code: MIL907736001. Confirm the electrical version, included accessories and current warranty with seller.
Considerations
This is a mobile jobsite power system. Plan fuel, maintenance, safe exhaust placement and transport capacity; generator output and welding duty cycle are separate ratings. Confirm the quoted engine and accessory configuration.
Rated Output
400 A at 36 V, 100% duty cycle / 450 A at 38 V, 100% duty cycle / 500 A at 40 V, 100% duty cycle
Air Carbon Arc Cutting and Gouging (CAC-A) / Flux Cored (FCAW) / MIG (GMAW) / Pulsed MIG (GMAW-P) / Regulated Metal Deposition (RMD) / Stick (SMAW) / TIG DC (GTAW-DC); engine driven
Not verified in extracted specifications; consult exact-model manual.
US$68,357.00United States
Quick details
Big Blue 600 Air Pak is a manufacturer-listed Air Carbon Arc Cutting and Gouging (CAC-A) / Flux Cored (FCAW) / MIG (GMAW) / Pulsed MIG (GMAW-P) / Regulated Metal Deposition (RMD) / Stick (SMAW) / TIG DC (GTAW-DC); engine driven option. Match its confirmed supply and process configuration to the work before shortlisting.
Duty cycle
500 A at 40 V, 100% duty cycle / 575 A at 43 V, 100% duty cycle / 600 A at 44 V, 60% duty cycle
Price basis
US advertised price; destination sales-tax basis not verified US supplier. Confirm destination eligibility, sales tax and delivery charges at checkout.
Package
Exact seller package; included accessories require confirmation · Published listing: Miller Big Blue 600 Air Pak - 907750. Exact order code: MIL907750. Confirm the electrical version, included accessories and current warranty with seller.
Considerations
This is a mobile jobsite power system. Plan fuel, maintenance, safe exhaust placement and transport capacity; generator output and welding duty cycle are separate ratings. Confirm the quoted engine and accessory configuration.
Rated Output
500 A at 40 V, 100% duty cycle / 575 A at 43 V, 100% duty cycle / 600 A at 44 V, 60% duty cycle
Price snapshots can differ by country, tax treatment, controls and included accessories. Sorting keeps each original currency separate. Read the full package and confirm an up-to-date local offer before buying. Descriptions are editorial assessments of specifications; they are not hands-on test results. Each model page keeps its references at the bottom.
What is verified?
38 EU models and 75 US models currently pass the stock gate. 608 PDF files have been preserved; 788 document records and 4 review links are attached to models.
